■ 概述
SBH15系列非晶合金配電變壓器是以非晶合金鐵心可取代硅鋼片鐵心的新型環保節能型變壓器。結構為三相五柱式結 構，高度低、空載損耗低（比S9型變壓器降低70%），聯結組為Dyn11，電壓質量高,安匝分布較平衡，軸向機械力較小，增 強了變壓器承受短路的能力。該系列變壓器運行安全可靠、安裝方便、維護簡單，環保性能優越，社會和經濟效益顯著， 廣泛應用于城網改造、住宅小區、商業中心、企業、學校等公共場所。

■General
SBH15 series of amorphous alloy distribution transformers are the new environment-friendly and energy- efficient transformers whose amorphous alloy core has replaced the silicon-steel core, which are with three- phase five-column structure, low height, low no-load loss (lower than S9 type Transformer by 70%), Dyn11 coupling group, high voltage quality, a more balanced distribution of ampere-turns, smaller axial mechanical force, so as to enhance the their ability to withstand short-circuit. this series of transformers have these features: safe and reliable, operation easy installation, simple maintenance, superior environmental protection performance and notable social and economic benefits, and they are widely used in network reform, residential areas, commercial centers, enterprises, schools and other public places.

■ 型號說明 Model Specification

■ 非晶合金變壓器鐵心
非晶合金是一種厚度極薄，僅0.025mm厚的導磁材料，它是直接從熔融的鋼水采用超急冷技術，經過冷卻滾筒，鑄成 帶狀薄片的高新技術產品。具有優良的導磁性，高強的韌性。用非晶合金制造的配電變壓器，空載損耗較S9系列下降70% 以上。非晶合金的特性使之成為環保節能的理想鐵心材料。

■Amorphous Alloy Transformer Core
the amorphous alloy is a kind of thick permeability magnetic material whose thickness is extremely thin, that is only 0.025mm, and it is also a kind of high-tech products which is directly made from the molten steel by using ultra-rapid cooling technique through cooling drum and finally cast into thin strip shape. It has an excellent permeability and strong toughness. The no-load loss of the distribution transformer made from amorphous alloy is lower than S9 series by 70%. Characteristics of amorphous alloymake it become an ideal core material which is environment-friendly and energy-efficient.

■ 性能參數
Performance Parameters
10kV系列三相全密封非晶合金鐵心配電變壓器
10kV Series of Three-Phase Omniseal Distribution Transformer with Amorphous Alloy Core

■ 非晶合金變壓器鐵心特點
▲ 高強的韌性：明顯高于傳統的鋼鐵材料。
▲ 優良的耐磨性：是制作磁頭的優良材料。
▲ 完善的磁性：由于非晶合金原子排列無序，沒有晶體的各向異性，而且電阻率高，因此有很高的導磁率、很低的損
耗，是優良的軟磁材料，代替硅鋼、坡莫合金和鐵氧體等作為變壓器、互感器、傳感器鐵心等，可以大大提高變壓器效率、縮
小體積、減輕重量、降低能耗。
▲ 靈活的處理工藝：和其它磁性材料相比，非晶合金具有很寬的化學成分范圍，而且即使同一種材料，通過不同的后續
處理能夠很容易地獲得所需要的磁性。
▲ 節能環保的制造工藝：制造硅鋼薄板成品，需要若干工藝環節，數十道工序，傳統的鋼鐵企業都是耗能和污染大戶。 而非晶合金的制造是在煉鋼之后直接噴帶，只需一步就制造出了薄帶成品， 節約了大量寶貴的能源，同時無污染物排放，對 環境保護非常有利。
■ Characteristics of Non-amorphous Alloy Transformer Core
Fine toughness: evidently superior to that of traditional steel materials
Superb abrasion resistance: ideal material of magnetic head
Complete magnetism: due to the orderless sequence of the atoms of non-amorphous alloy free form the
anisotropy of crystal and high resistivity, high magnetic permeability and low loss of eminent soft magnetic material. Compared with silicon steel, perm alloy, and ferrite cores, mutual inductors, sensors, etc., it greatly improves efficiency, diminishes volume, weight, and energy consumption.
Flexible processing: compared with other magnetic materials non-amorphous alloy has wider scope of chemical elements; even as for the same materials, different required magnetism can be easily acquired after certain special treatments. Energy-conservative and environment-friendly manufacturing process: the manufacture of silicon steel sheet final product requires several technical links, or dozens of procedures, thus the traditional steel enterprises are great energy consumers and contamination causers. While the manufacture with non-amorphous products -- immediate spraying belt after the steel-making, is easier. or only one touch makes the final sheet product that saves substantial energy and discharges no pollutants, making great contribution to environmental protection.

■ 硅鋼和非晶合金材料的晶體排列
Crystal Arrangement of Silicon Steel and Non-amorphous Alloy Materials